wind turbine

Advantages

★ Smart Voltage Change: Would you want to change the output voltage? This is very easily, just change the position of the switch on the bottom of body. The 12V system is fit for lower wind speed and the 24V system is fit for higher wind speed.

★ Rotation = Charging: The SSTR 600 make use of a super voltage boosting technology which allows the Wind Generator to reach charging voltage at a very low wind speed (3m/s). The wonderful thing is, just in the condition of 300RPM, the 24V system can start to charge. (Remark: 12V system does not use the voltage boosting technology, but with the benefit of the top design for the blades, alternator and circuit, the charging condition of SSTR 600 is much better.

★ CFRP Blades: The rotor blades are made of CFRP, and manufactured by precise injection process, so it is rigid, the best charging and minimal vibration on blades.

★ Aluminum-Magnesium Alloy Framework: All frameworks are made of magnalium: Body, Face, Hub, Yaw Shaft, Etc. This is a highly anticorrosive and very hard material

Ø Small yet the most Powerful: With the highly efficient blades, controller and alternator, the SSTR600 can provide the most maximum output in the world at the same size, weight and rotating diameter.

Ø The SSTR600 provides the best protection: Voltage auto-brake, Slow down in strong wind (Hysteresis Braking), Shut down completely in storm, battery charge protection, and so on.

Ø Over-speed Protection: Fully “utilize” wind power; the blades will not be brake between the wind speed of 0m/s to 25m/s. Once the Wind Generator “senses” the wind speed is higher than 25m/s, it will shut down completely and stop charging to protect the battery.

Ø Constant Current Charge: In the same wind speed condition, when the battery is nearing to full, the charging current of the wind generator will be gradually lesser, but SSTR600 can always keep a steady charging current, so it can fully make use of the wind's energy and at the same time it can also effectively protect your battery!